The Victron Quattro 10 kVA is a high-performance inverter/charger designed for demanding off-grid, backup, and energy-storage systems. It features dual AC inputs with automatic switching, seamless no-break power output, and full compatibility with three-phase, split-phase, and large parallel systems.
KSh 359,999.00
The Victron Quattro can connect to two independent AC sources, such as the public grid and a generator, or two generators. It automatically switches to the active source, ensuring uninterrupted power.
The main output provides no-break functionality. The Quattro immediately takes over the supply to connected loads if the grid fails or shore/generator power disconnects. This transfer happens in less than 20 milliseconds, allowing computers and other electronic equipment to continue operating without interruption.
The second output activates only when AC power is available on one of the Quattro inputs. Connect loads that should not discharge the battery—like water heaters—to this output.
You can create a split-phase AC source by connecting our autotransformer to a single-phase 240 V inverter programmed to operate at 60 Hz.
You can configure three units to deliver a three-phase output. Furthermore, up to four sets of three 15 kVA units can operate in parallel, providing 144 kW / 180 kVA inverter power and 2400 A of charging capacity.
The Quattro includes a powerful battery charger that can draw significant current from a generator or shore supply (for example, a 5 kVA Quattro can draw up to 16 A at 230 VAC). You can set a current limit for each AC input. Once you configure the limit, the Quattro monitors other AC loads and uses only the remaining current for charging, preventing overload on the generator or mains supply.
PowerAssist builds on the PowerControl function by temporarily boosting the capacity of the external AC source. When your system requires peak power for short periods, the Quattro instantly supplements insufficient generator or shore power with battery energy. After the load drops, it automatically uses the spare power to recharge the battery.
The Victron Quattro 48/10000/140 230V works in:
Off-grid systems
Grid-connected PV systems
Hybrid setups with MPPT chargers or grid-tie inverters
It also supports loss-of-mains detection for regulatory compliance.
In stand-alone systems, settings can be changed within minutes using the DIP switch setup procedure. For parallel or three-phase systems, configure the units with VE.Bus Quick Configure or VE.Bus System Configurator software. When dealing with off-grid, grid-interactive, or self-consumption systems—especially those including grid-tie inverters or MPPT Solar Chargers—you can set up the Quattro using the appropriate Assistants, which are specialized software modules for each application.
You can monitor and control the Quattro using:
Battery Monitor
Multi Control Panel
Color Control GX or other GX devices
Smartphone or tablet via Bluetooth Smart
Laptop or computer via USB or RS232
When connected to Ethernet, systems with a Color Control GX or other GX device can be accessed remotely. You can view data and adjust settings via the VRM (Victron Remote Management) website, free of charge.
| Category | Specification |
|---|---|
| Model | Victron Quattro 48/10000/140-100/100 (230V) |
| Nominal Battery Voltage | 48 V |
| PowerControl / PowerAssist | Yes |
| Integrated Transfer Switch | Yes |
| AC Inputs | 2×100A |
| AC Input Voltage Range | 187–250 VAC |
| AC Input Frequency | 50/60 Hz |
| Cos ϕ | >0.8 |
| Maximum Feed-Through Current | 2× 100 A |
| ICw | 10 kA for 30 ms |
| DC Input Voltage Range | 38–66 VDC |
| AC Output Voltage | 230 VAC ± 2% |
| AC Output Frequency | 50 Hz ± 0.1% |
| Continuous Output Power (VA) @25°C | 10,000 VA |
| Continuous Output Power (W) @25°C | 8,000 W |
| Continuous Output Power (W) @40°C | 6,500 W |
| Continuous Output Power (W) @65°C | 4,500 W |
| Peak Power | 20,000 W |
| DC Input Current | 235 A |
| Max Continuous AC Output Current | 37 A |
| Power Factor Range | ±0.8 |
| Maximum Output Fault Current | 100 A for 1 sec |
| Efficiency (Max) | 96% |
| Zero Load Power | 60 W |
| Zero Load Power (AES Mode) | 40 W |
| Zero Load Power (Search Mode) | 15 W |
| Absorption Voltage | 57.6 V |
| Float Voltage | 55.2 V |
| Storage Voltage | 52.8 V |
| Charge Current (House Battery) | 140 A |
| Charge Current (Starter Battery) | — (not on 48V models) |
| Battery Temperature Sensor | Yes |
| Auxiliary Output | 50 A |
| Programmable Relays | 3× |
| Protection | a–g |
| VE.Bus Communication | Yes (parallel, 3-phase, integration) |
| General Purpose Com Ports | 2× |
| Remote On/Off | Yes |
| Operating Temperature | −20°C to +60°C |
| Humidity (Max, Non-Condensing) | 95% |
| Maximum Altitude | 2000 m |
| Enclosure Material / Colour | Aluminium, Blue (RAL 5012) |
| Protection Category | IP20 (Pollution Degree 2, OVC III) |
| Battery Connections | 4× M8 bolts (2+ / 2−) |
| AC Connection | Screw terminals 13 mm² |
| Dimensions (H × W × D) | 470 × 350 × 280 mm |
| Weight | 51 kg |
Downloads and Support
1. Victron Quattro 48/10000/140-100/100 (230V) Manual.
2. Victron Quattro 48/10000/140-100/100 (230V) Datasheet.
Optimized by Seraphinite Accelerator
There are no reviews yet.